Fakhar Mobiles

iPhone Panel Replacement Guide

iPhone Panel Replacement Guide

Working on iPhones can feel tricky, especially with their delicate components and tight designs. This guide is written in a simple way to help both beginners and experienced technicians understand how to repair iPhones. Whether you’re fixing a cracked screen or replacing a Face ID panel, you’ll find everything you need here.

1. Essential Tools for iPhone Repair

Before you start repairing any iPhone, here are the tools you’ll need. These tools are specially designed for small parts in iPhones, making your job easier:

  1. T4 Screwdriver – Used for loosening and tightening tiny screws inside iPhones.
  2. T3 Screwdriver – Needed for even smaller screws that secure internal parts.
  3. Big T4 Screwdriver (2.5mm) – Handy for larger screws, mostly found in older models.
  4. Star T Screwdriver – Removes screws with a star-like design that you’ll find in most iPhones.
  5. T2 Screwdriver – Good for newer iPhone builds with finer screws.
  6. Breaking Pen – Loosens strong adhesive without damaging components.
  7. Knife Blade / Paper Blade / Surgical Blade – These sharp blades help cut through adhesive or cleanly remove glued parts.
  8. Straight and Curved Tweezers – Essential for handling tiny parts like cables and adhesive strips.
  9. Glue (T.7000) – Used to stick parts back snugly while keeping flexibility.
  10. Qualking Glue Black – Works on water-resistant models to maintain their protective seal.
  11. Triangle Opener (Plastic/Steel) – A simple tool to carefully lift and open iPhone panels.
  12. Glass Changing Wire (0.04mm or thicker) – Helps separate broken glass from the display screen.

Tip: Always keep your tools organized and clean. This reduces the chance of losing small screws or parts during the repair process.

2. Directions for Opening iPhone Panels

iPhone models open in different ways, depending on their series. This guide shows you the right direction to open each type without damaging its internal parts.

  • iPhone 2G to 6 Series: Open the panel upwards (towards the top of the phone).
  • iPhone 7 to 11 Series: Open the panel to the right side, just like opening a book from its left edge.
  • iPhone 12 to 16 Series: Open the panel to the left side to avoid pulling on the delicate cables.

Steps to Open the iPhone Panel

  1. Turn off the phone completely to avoid electric shocks or short circuits.
  2. Unscrew the two small screws at the bottom of the phone using the Star T screwdriver.
  3. Apply heat using a heat gun or separator machine to soften the adhesive around the edges (temperature: 80°C to 100°C).
  4. Attach a suction cup to the screen near the bottom and gently pull up a little.
  5. Insert a triangle opener or surgical blade into the gap to lift the screen, following the direction for the specific iPhone model.

Note: Go slow to avoid tearing cables that connect the display to the phone.

3. Types of Panel Glass

iPhones come with two types of glass panels, depending on the model you’re repairing. Knowing this will help you choose the right replacement.

1. Home Button Panels

  • Found in models from iPhone 2G to iPhone 8 and in some newer devices like iPhone 11 and XR.
  • These panels are usually LCD screens that are cheaper and easier to replace.

2. Face ID Panels

  • Found in models from iPhone X onwards up to the latest.
  • These panels are OLED screens, which produce sharper colors but are more expensive and delicate.

Key Difference: Home Button Panels focus on physical buttons, while Face ID Panels use software for unlocking.

4. How to Replace a Home Button Panel

Here’s an easy guide to replacing panels with home buttons:

  1. Unscrew the two screws near the charging port using the Star T screwdriver.
  2. Apply heat to loosen the glue around the edges.
  3. Use a surgical blade or opener tool to carefully lift the screen.
  4. Disconnect the four connectors:
    • Battery Connector
    • Touch Strip
    • Display Connector
    • Front Camera Ribbon
  5. Take out these components from the old panel and transfer them to the new one:
    • Front Camera Strip
    • Steel Frame
    • Home Button

Note: Do not use cheap “copy” glass replacements for Home Button panels. They may not function properly.

5. How to Replace a Face ID Panel

The process is slightly different for Face ID-equipped iPhone panels:

  1. Unscrew the device and check if the phone is water-resistant. Test this by blowing air into the SIM tray area. If air passes through, the phone is not sealed.
  2. Heat the iPhone for 5 minutes at 80–100°C using a separator machine to loosen the adhesive.
  3. Slowly insert a blade or opener tool around the edges.
  4. Detach four strips or ribbons:
    • Battery Strip
    • Touch Strip
    • Display Strip
    • Ear Piece Strip

Working with Ear Piece Strips

Face ID relies on parts inside the ear piece strip, which include:

  • Mic for Front Camera
  • Call Sensor
  • Ear Speaker
  • True Tone Sensor
  • Face ID Connection

If any part of the ear piece fails, replace the entire strip. Detach it from the old screen and attach it to the replacement panel.

Tip: Ensure proper alignment when installing the ear piece strip in the new panel to avoid Face ID issues.

6. Understanding Types of Replacement Panels

Not all panels are of the same quality! Here’s what you’ll find in the market:

  1. iCloud Panel
    • Original and genuine panels directly from Apple.
    • Best quality but expensive.
  2. Mechanic Company Panels
    • These are OLED copies, offering sharp colors similar to original panels.
    • Cheaper than original screens with decent quality.
  3. GX Panels
    • Available as LED or LCD copies.
    • Affordable but may compromise on screen brightness or color quality.

Tip: Always discuss with customers what type of panel they prefer and explain the pros and cons.

Final Tips

  • Always label screws and small parts during disassembly to avoid confusion during reassembly.
  • Use anti-static mats while working to prevent accidental damage to components.
  • Double-check new panels for any defects before installation.
  • Avoid cheap adhesives or tools that may damage the phone during repair.

With the right tools and guidance, repairing iPhones can become a straightforward process. Practice patience, use quality parts, and follow this guide for a professional repair experience. Happy repairing!

iPhone Panel Replacement Guide
iPhone Panel Replacement Guide
iPhone Panel Replacement Guide

iPhone ke Panel Tabdil Karne ki Mukammal Guide

iPhones par kaam karna thoda mushkil lag sakta hai, khaaskar unke naazuk parts aur tight design ki wajah se. Yeh guide aasan zabaan mein likhi gayi hai taa ke naye seekhnay walon aur tajurba-kaar technicians dono ke liye madadgar ho. Chahe aap toota hua screen panel theek kar rahe hon ya Face ID panel replace kar rahe hon, yahan aapko har zaroori maloomat milegi.

1. iPhone ki Murammat ke Zaroori Tools

iPhone ki repair shuru karne se pehle, yeh tools zaroori hain. Yeh khas tor par iPhone ke chhote chhote parts ke liye design kiye gaye hain taa ke kaam asaan ho jaye:

  1. T4 Screwdriver – Chhote screws ko kholne aur kasne ke liye.
  2. T3 Screwdriver – Aur bhi chhote screws ke liye jo andar ke parts ko mazbooti se jode rakhte hain.
  3. Bara T4 Screwdriver (2.5mm) – Purane models ke bade screws ke liye kaam aata hai.
  4. Star T Screwdriver – Star shape ke screws nikalne ke liye, jo zyada iPhones me milte hain.
  5. T2 Screwdriver – Nai iPhone models me use hone wale chhote screws ke liye.
  6. Breaking Pen – Taakatwar glue ko bina nukhsan kiye dheela karne ke liye.
  7. Surgical Blade / Paper Blade – Glue ko kaatne ya chhupke se kisi part ko alag karne ke liye.
  8. Seedhi aur Terhi Tweezers – Chhoti chhoti cheezon ko sambhalne ke liye.
  9. Glue (T-7000) – Parts ko chipkane ke liye jo flexible rahe.
  10. Qualking Glue Black – Water-resistant iPhones me asli seal ko barkarar rakhne ke liye.
  11. Triangle Opener (Plastic/Steel) – iPhone panels ko aram se uthane ke liye.
  12. Glass Changing Wire (0.04mm ya motee) – Tootay huay glass ko screen se alag karne ke liye.

💡 Tip: Apne tools hamesha saaf aur tartib se rakhein taa ke chhoti screws ya parts kho na jayein.

2. iPhone Panel Khulne ki Tarika

Har iPhone model alag tareeke se khulta hai. Galat tareeke se kholne se andar ke parts kharab ho sakte hain.

  • iPhone 2G se iPhone 6 tak: Panel ko upar ki taraf kholain.
  • iPhone 7 se iPhone 11 tak: Panel ko dayein taraf kholain, jaise kitaab ka safha palta jata hai.
  • iPhone 12 se iPhone 16 tak: Panel ko baayen taraf kholain taa ke flex cables na tootein.

iPhone Panel Kholne ke Steps

  1. Phone ko band kar lein taa ke koi short circuit na ho.
  2. Charging port ke qareeb Star T screwdriver se do chhoti screws kholain.
  3. Heat gun ya separator machine ka istemal karein aur edges ko 80°C se 100°C tak garam karein taa ke glue naram ho jaye.
  4. Screen ke neeche suction cup laga kar dheere se kheenchain.
  5. Triangle opener ya surgical blade use kar ke halkay hath se screen uthain.

⚠️ Note: Dheere kaam karein taa ke andar ki cables na tootein.

3. iPhone Panel Glass ki Iqsam

Har iPhone do qisam ke glass panels ke sath aata hai. Yeh maloom hona zaroori hai taa ke sahi replacement lein.

1. Home Button Panels

  • iPhone 2G se iPhone 8 tak ke models me hota hai, aur kuch naye models jaise iPhone 11/XR me bhi.
  • Ye LCD screens hoti hain, jo sasti aur asaan tareeke se replace hoti hain.

2. Face ID Panels

  • iPhone X se aage ke models me hota hai.
  • OLED screens hoti hain jo behtareen colors aur resolution deti hain, magar mehngi aur nazuk hoti hain.

💡 Farq: Home Button Panels physical button par depend karte hain, jabke Face ID Panels software-based unlocking istemal karte hain.

4. Home Button Panel Ko Replace Karne Ka Tarika

  1. Star T screwdriver se charging port ke paas ke screws kholain.
  2. Heat gun se glue naram karein.
  3. Surgical blade ya opener tool use kar ke screen uthain.
  4. Chaar connectors ko alag karein:
    • Battery Connector
    • Touch Strip
    • Display Connector
    • Front Camera Ribbon
  5. Purane panel se yeh parts nikal kar naye panel me daalain:
    • Front Camera Strip
    • Steel Frame
    • Home Button

⚠️ Note: Sasti aur copy screens na istemal karein, kyunki inme touch aur button problems ho sakti hain.

5. Face ID Panel Ko Replace Karne Ka Tarika

  1. Pehle check karein ke phone waterproof hai ya nahi. SIM tray me hawa phoont kar dekhein. Agar hawa andar jaye, to phone waterproof nahi hai.
  2. Phone ko 80–100°C par 5 minute tak garam karein.
  3. Blade ya opener tool use kar ke edges kholain.
  4. Chaar ribbons ko alag karein:
    • Battery Strip
    • Touch Strip
    • Display Strip
    • Ear Piece Strip

Ear Piece Strip me shamil parts:

  • Front Camera Mic
  • Call Sensor
  • Ear Speaker
  • True Tone Sensor
  • Face ID Connection

⚠️ Note: Agar ear piece strip kharab ho jaye to puri strip replace karein.

6. Replacement Panels Ki Iqsam

Market me mukhtalif qisam ke panels milte hain. Har aik ki apni quality hoti hai:

  1. iCloud Panel – Original Apple ke panels, sabse behtareen magar mehngi.
  2. Mechanic Company Panels – OLED copies, jo asal screen ke kareebi colors deti hain.
  3. GX Panels – LED ya LCD copies, saste magar screen brightness aur color quality compromised hoti hai.

💡 Tip: Customer se pehle mashwara karein ke wo kaunsa panel lena chahte hain aur unhein farq samjhayein.

Aakhri Tips

✔️ Screws aur chhoti cheezon ko label karein taa ke fit karte waqt asani ho.
✔️ Anti-static mat ka use karein taa ke phone ke circuits safe rahein.
✔️ Naye panels ko fit karne se pehle unka test karein.
✔️ Sasti glue ya low-quality tools ka istemal na karein taa ke phone ka nuksan na ho.

💡 Sahi tools, sabr aur tajurba ke sath, iPhone repair karna aasan ho sakta hai. Behtareen kaam karein aur apne customers ko khush rakhein! 🚀

FAQs About iPhone Repair Tools and Panel Replacement

Tools for iPhone Repair

1. What are the essential tools needed for iPhone repair?

You’ll need the following tools:

  • T3, T4, T2, and Big T4 screwdrivers for various screws.
  • A surgical blade or knife blade for cutting adhesives.
  • Curved and straight tweezers to handle tiny components.
  • T.7000 glue for general stickiness and Qualking Glue Black for water-resistant sealing.
  • Triangle opener (plastic or steel) to lift iPhone panels.
  • Glass-changing wire for separating broken glass from the screen.

2. Can I repair iPhones without these specific tools?

Using proper tools is strongly recommended. Substituting specialized tools with random household items can damage the delicate components. If necessary, buy affordable repair kits that include basic tools.

3. How do I maintain my iPhone repair tools?

  • Clean tools after every use to prevent dirt and adhesive buildup.
  • Store screwdrivers and blades in a dry place to avoid rusting.
  • Replace worn-out blades and damaged tools regularly for accurate results.

4. What glue is best for water-resistant iPhone models?

Qualking Glue Black is ideal for maintaining the water resistance of iPhone models. Regular adhesives like T.7000 can seal parts but are not water-resistant.

5. What is a glass-changing wire, and why do I need it?

Glass-changing wire is a thin, strong wire used to separate broken glass from the LCD or OLED screen. It minimizes the risk of damaging the display beneath the broken glass.

Opening an iPhone Panel

6. How can I identify the correct panel opening direction?

  • iPhone 2G to 6 Series: Open upwards towards the phone’s top.
  • iPhone 7 to 11 Series: Open to the right side.
  • iPhone 12 to 16 Series: Open to the left side.

7. How do I safely open an iPhone panel without breaking it?

Follow these steps:

  1. Turn off the phone and unscrew the bottom screws.
  2. Apply heat (80–100°C) around the edges to soften the adhesive.
  3. Attach a suction cup to the screen and pull gently.
  4. Use a triangle opener or blade to carefully lift the screen in the correct direction.

8. What common mistakes should I avoid when opening iPhone panels?

  • Applying too much force when lifting the screen, which could tear cables.
  • Forgetting to heat the adhesive before opening.
  • Using unsuitable tools like knives, which can crack the glass.

9. How do I check if the device is water-resistant before opening it?

Remove the SIM tray and blow air into the slot. If air passes through the phone, it’s not water-resistant.

Types of Panels

10. What are the two main types of iPhone panel glass?

  1. Home Button Panels: Found in iPhone 2G to 8 models and some newer ones like iPhone XR. These have LCD screens.
  2. Face ID Panels: Found in iPhone X to the latest models. These have OLED screens.

11. What’s the difference between LCD and OLED screens?

  • LCD screens: Cost-effective, good brightness, and commonly used in older models.
  • OLED screens: Higher-quality colors, thinner, and more expensive; used in newer models.

Panel Replacement

12. How do I replace a Home Button Panel?

  1. Remove the screws and lift the panel using an opener tool.
  2. Disconnect the battery, touch, display, and front camera connectors.
  3. Transfer the front camera strip, steel frame, and Home Button to the new panel.

13. How do I replace a Face ID Panel?

  1. Heat the device for 5 minutes to loosen adhesive.
  2. Remove screws and pry the screen gently.
  3. Disconnect the battery and other strips, including the ear piece strip.
  4. Check the ear piece components (mic, call sensor, etc.) and transfer them carefully to the new panel.

14. What should I do if the ear piece strip stops working?

Replace the entire ear piece strip if any internal component is faulty.

15. What are the types of replacement panels available?

  • iCloud Original Panel: Highest quality but expensive.
  • Mechanic Company Panel: Affordable OLED copy panels.
  • GX Copy Panel: Budget-friendly LCD and LED options.

16. Can I use a copy glass for Original iPhone Home Button Panels?

No, copy glasses do not work reliably with Home Button panels. Always use original or certified parts for these models.

17. How do I ensure the phone retains water resistance after repair?

Use Qualking Glue Black around the panel edges while sealing the phone. This glue mimics the original water-resistant adhesive.

Troubleshooting and Common Issues

18. What if the new iPhone panel doesn’t turn on?

  • Double-check the connections for all cables.
  • Test the phone with the old panel to confirm it’s not a motherboard issue.
  • Ensure the replacement panel is compatible with the model.

19. Why is the display not responding after panel replacement?

  • Check the touch strip connection.
  • Look for damage in the connectors during reassembly.
  • Make sure there’s no debris obstructing the connections.

20. My Face ID isn’t working after replacing the panel. What should I do?

  • Ensure the ear piece strip is correctly installed.
  • If Face ID components are damaged during repair, they may need replacement.

21. What are the signs of a faulty replacement panel?

  • Dim or uneven display brightness.
  • Poor touch response.
  • Dead pixels or other visual defects.

22. How do I avoid damaging internal parts during repairs?

  • Take photos of the disassembly process for reference.
  • Work slowly and avoid pulling cables with force.
  • Use anti-static mats to prevent electrostatic damage.

Tips for Beginners

23. Is iPhone repair a difficult process?

It can be tricky, especially with newer models. Start with older models and practice basic repairs like screen replacements to build confidence.

24. What’s the best way to organize screws and small parts?

Use a magnetic mat or compartmentalized box. Label each section to match the part it holds.

25. How can I practice iPhone repairs without damaging customer devices?

Buy faulty or old phones to practice your skills. You can find these devices online at low prices.

26. Why isn’t my adhesive sticking properly?

Ensure the surfaces are clean and dry before applying glue. Use the recommended adhesive type for each repair.

With these FAQs, you’ll have the confidence to handle common iPhone repair challenges like a pro!